Sitemap Print Send to friend est eng

Stenner ST VHT

The range includes single head (ST models) and twin head (VHT) machines to cover a variety of volume requirements and applications, whether installed as the main production machine in a smaller workshop or providing off-line flexibility in a larger mill.

 

ST resaws require no pit or special foundations for installation (apart from the largest ST150 model, which requires a pit but has a steel subframe to eliminate the need for a special foundation). The machines are simply bolted to the factory floor and connected to electrical and pneumatic/hydraulic (depending on model) supplies and dust extraction. In addition, the low noise level during operation means there is no need for a sound enclosure. If the mill layout changes, the 'no pit' ST resaws can easily be re-sited.

 

VHT resaws do require a pit for installation, but enable higher productivity since two cuts can be made in a single pass.

 

Precision cutting is ensured by the solid 'vibration-free' construction combined with the effective sawblade straining system and pressure sawguides, with the tensioned thin gauge wide bandsaw blade resulting in narrow saw kerf and therefore increased yield. The radial arm provides constant pressure throughout the full operating range for accurate feeding of varying timber dimensions.

 

Heavy-duty cast iron pulleys give long service life between resurfacing, with cleaning fluid automatically delivered to the pad and scraper system to control of resin and sawdust build-up on the pulleys and the blade. Integrated ducting and extracting points are provided for efficient removal of sawdust.

Single head models

ST80 - classic Stenner heavy-duty build, quality & performance, with pneumatic saw straining, adjustable fence with tilting facility, infinitely variable feed speeds, and HMI electronic controller (feed speed and set up and including diagnostics) which simplifies operation.

 

ST100R - a highly engineered, compact and reliable band resaw that is particularly suitable for joinery workshops, furniture manufacturers, builders’ merchants and the many other woodworking establishments where quality, reliability and versatility are important factors, incorporating a soft-touch digital pad allowing all major functions to be controlled from one point.

 

ST100HS - a specialist high-strain, low kerf resaw that is ideal for accurate sawing of high quality products from valuable timbers for applications such as musical instruments and fine furniture, featuring a pneumatic radial arm with photocell activation, 203mm polyurethane feed rollers, manual (screw jack) tilting chrome fence and table rollers as standard as well as the HMI controller (programming of sawblade and feed speed and indicating fence position).

 

ST130 - combines the performance of a 130mm wide bandsaw with the convenience of 'no pit' installation, for producing quality sawn timber from the largest cross-sections, incorporating a soft-touch digital key pad and feed control located in a remote pedestal.

 

ST150 - invaluable as a general purpose resaw in green mills and dry mills and particularly useful for splitting squares and deals into furniture size, with powerful hydraulic feed for fast, accurate cutting of any timber section within its large capacity range.

Twin head models

VHT36 - specifically designed to meet the needs of timber merchants, planing mills and sawmills where relatively small sections of timber require one or two saw cuts, with full width horizontal rollers at infeed and outfeed, fence dial with enlarged scale, and a fully flexible radial arm that is pneumatically operated and cushioned and quickly controlled.

 

VHT105 - a general purpose machine with powerful hydraulic feed, suitable for high production resawing in planing mills and sawmills where one or two saw cuts are required, with horizontal rollers synchronised with the vertical feed rolls, deep robust fence with sealed bearing rollers for smooth timber flow, fence dial with enlarged scale and hydraulically-operated radial arm giving constant pressure on unsawn surfaces.

 

VHT120 - a robust, powerful sawmill machine designed particularly for the conversion of slabs and cants into finished product, helping to substantially increase output and achieve high timber recovery rates, with remachinable pressure sawguides as standard, horizontal rollers synchronised with the vertical feed rolls, deep robust fence with sealed bearing rollers, fence dial with enlarged scale and hydraulically-operated radial arm giving constant pressure on unsawn surfaces.

Key performance data
Model
Pulley diameter/
blade width
Timber size (width x depth
of cut)
Roller fence to saw line (max)
Feed rolls to saw line (max)
Distance between blades on Twin models
Feed speed
Tilt
ST80
850mm/80mm
510mm x 310mm
280mm
230mm (std)
255mm (optional)
NA
5-60m/min
0-35deg
ST100R
915mm/100mm
530mm x 400mm
300mm
230mm
NA
5-60m/min
0-35deg
ST100HS
915mm/80mm
330mm x 370mm
100mm
230mm
NA
5-60m/min
0-35deg
ST130
950mm/130mm
605mm x 400mm
300mm
300mm
NA
5-60m/min
0-45deg
ST150
1220mm/150mm
610mm x 710mm
457mm
305mm
NA
5-60m/min or 0-30m/min
0-45deg
VHT36
915mm/100mm
385mm x 380mm
230mm
150mm
5mm (min)
180mm (max)
0-40m/min
0-45deg
VHT105
1050mm/130mm
510mm x 380mm
355mm
150mm
5mm (min)
250mm (max)
0-60m/min
0-45deg
VHT120
1220mm/150mm
405mm x 500mm
250mm
150mm
5mm (min)
280mm (max)
0-60m/min
0-45deg